|
Arduino Nano V3 |
x 1 | |
|
HV-5RGB60Inolux
|
x 1 | |
|
|
5v water pump |
x 1 | |
|
|
330 ohm Resistor |
x 3 | |
|
|
5v Soil moisture sensor |
x 1 |
|
arduino IDEArduino
|
Arduino-watering-system
This is a pcb board for a atonomous watering system.
The arduino nano checks if water is present in the reservoir:
If water is present, it checks the moisture level of the Plant, if it to moist it doese nothing, else it waters the plant.
The RGB is for telling the user if it there is water in the reservoir, if not it blinks red. If the system is ok and it can water the Plat the led stays green.
Arduino-watering-system
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Pasquale Maccariello
-
Programmable Mist Maker - XIAO / QT PY Extension
1423 2 1 -
RadioHAT - Raspberry Pi radio development platform
1198 0 3 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3560 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4238 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4617 2 2
