Electronics Splice Board for two different LED trees/signals
Two signals for controlling a large array of LEDS. 16 pads for signal 1, and 12-13 pads for signal 2, with two mounting holes for M2 screws.
PROTOTYPE. V1. Larger spacing of pads allows easier soldering and fewer wires into the board, to allow more localized wiring trees.
Electronics Splice Board for two different LED trees/signals
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Midcrustal Matt
-
8 Component Solderable Breadboard
This circuit board allows the user to solder components (LEDS, inputs, outputs) directly to the boar...
-
Electronics Splice Board for two different LED trees/signals
Two signals for controlling a large array of LEDS. 16 pads for signal 1, and 12-13 pads for signal 2...
-
Arduino Splice "Charcuterie" Board (Nano and Uno)
This printed circuit board (PCB) is designed to allow DIY electronics to be more easily connected to...
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
150 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
319 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1319 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
750 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3285 2 4
