Bottom Soldermask
Top Soldermask
Bottom Copper
Top Silkscreen
NC Drill
Top Copper
Bottom
Top
Arduino Nano LEDs Board
### DESCRIPTION
This is a PCB for anyone that wishes to add High Voltage LEDs anywhere. You only need to power it up with any DC voltage lower that 15V to power anything below that voltage.
### TECHNICAL DETAILS / COMPONENTS
You will need to add a 7812 Voltage regulator, 7805, some capacitors, TIP122 transistors, screw terminals and you are done. What you are basically doing is grounding the LEDs whenever you need them since they are naturally connected to the input voltage.
### LEARN / TOPIC / BUILD INSTRUCTIONS
It's pretty easy to see how to build this board, but if you have any questions please email me to pcruiher089@gmail.com
Arduino Nano LEDs Board
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(4)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by pcruiher08
-
Programmable Mist Maker - XIAO / QT PY Extension
1061 2 1 -
RadioHAT - Raspberry Pi radio development platform
867 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3323 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3933 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4320 2 2
