|
KiCADKicad
|
|
|
QuartusIntel
|
Amiga 3000 ReSDMAC
This project is a community effort with the PCB design by Jorgen Bilander and the code by Mike Taylor. It has been an exercise in reverse engineering the Commodore SDMAC 390537 as found in the Amiga 3000
This project started with nothing more than the descriptions of the SDMAC operations from the Amiga 3000T Service manual, the WD33c93 Datasheets and some source code from the Amiga 3000 Linux SCSI drivers. However, the original Commodore schematics and state machine documentation were found which helped immensely.
Amiga 3000 ReSDMAC
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(7)
More by Michael Taylor
-
Programmable Mist Maker - XIAO / QT PY Extension
1084 2 1 -
RadioHAT - Raspberry Pi radio development platform
904 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3341 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3955 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4342 2 2
