|
|
7805 |
x 1 | |
|
|
EPM7128SLC84 |
x 1 |
Altera EPM7128SLC breakout board
This board can be used for experimenting with Altera (Intel) CPLDs. LM317 is optional and only needed if IO voltage different than 5V is needed. To build this board I typically use whatever parts are floating around, scavenged from old boards. Any capacitor or resistor close to marked value will work. Values are marked on silkscreen. I use machined pin sockets for oscillator. This way different oscillators can be used as needed.
Video presenting assembly of this board on YouTube https://www.youtube.com/watch?v=BJmJtk_xnr0
Altera EPM7128SLC breakout board
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Artur Jasowicz
-
myz80_proto_r1
My modular Z80 computer - Proto board for experimenting with your own circuits
-
myz80_cf_r1
My modular Z80 computer - Compact Flash interface
-
myz80_io_r2
My modular Z80 computer - io board with serial port and sound chips. You can connect this board to t...
-
Rotary encoder with 7-segment display and Lattice MachXO CPLD
For those looking for a trickier board to assemble, here's an encoder board with Lattice MachXO CPLD...
-
Rotary encoder with LEDs - through hole version
Through-hole version of my encoder with LEDs projectAny resistors in 200-1000 ohm range can be used ...
-
Rotary encoder and LED breakout board
Breakout board with rotary encoder and 5 LEDs. This can be used for experimenting with digital circu...
-
Altera EPM7032 EPM7064 breakout board
This board can be used for experimenting with Altera (Intel) CPLDs. Either EPM7032SLC44 or EPM7064SL...
-
Altera EPM7128SLC breakout board
This board can be used for experimenting with Altera (Intel) CPLDs. LM317 is optional and only neede...
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
241 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
242 0 1 -
-
-
