|
|
Edge Connector 62 pin (8-bit)EDAC
|
x 1 |
8-bit ISA 90 degrees card riser
This is a simple 1:1 90 degrees 8-bit ISA riser card. Its purpose is to allow to run ISA cards facing UP so it's simpler to use diagnostic tools - multimeters, oscilloscope - while the card is working.
Power traces are larger to allow more current.
There is a 16 bit version available too.
8-bit ISA 90 degrees card riser
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(4)
More by Tony359 - Tony's Tinkering Shop
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
36 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
864 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
507 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
2975 2 3 -
RadioHAT - Raspberry Pi radio development platform
2523 0 4 -
-
-
