|
|
Edge connector 98 pins (16-bit)EDAC
|
x 1 |
16-bit ISA 90 degrees card riser
This is a simple 1:1 90 degrees 16-bit ISA riser card. Its purpose is to allow to run ISA cards facing UP so it's simpler to use diagnostic tools - multimeters, oscilloscope - while the card is working.
Power traces are larger to allow more current.
There is an 8 bit version available too.
16-bit ISA 90 degrees card riser
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(8)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Tony359 - Tony's Tinkering Shop
-
Programmable Mist Maker - XIAO / QT PY Extension
1886 2 2 -
RadioHAT - Raspberry Pi radio development platform
1604 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3824 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4588 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5387 2 2 -
