Components

	BS170 onsemi(安森美)	x 3
	CF18JT100R Stackpole Electronics Inc	x 3
	CF18JT1K00 Stackpole Electronics Inc	x 3

Tools, APP Software Used etc.

KiCAD

Kicad

Description

3-Channel general purpose NFET driver

This was originally designed to drive an industrial Red/Yellow/Green LED signal light tower from an Arduino Nano, but this can be used to drive any load at up to 60V/500mA, such as RGB LED strips, etc. Connect the positive terminals of your load to your supply voltage and the negative terminals to the _OUT pads of this PCB. Connect your control signals to the _IN pads of this board, and connect the GND from your controller to the GND1 pad. This was designed to be controlled by +5V I/O, but it should work with +3.3V also for lighter loads.

Schematic and Layout

Schematic

Schematic.pdf

Download Gerbers Download BOM(Bill of materials)

Sep 22,2023

603 views

3-Channel general purpose NFET driver

Simple, 3-channel low-side NFET driver for LEDs and other things powered by up to 60V/500mA, controlled by an Arduino or similar digital I/O

603

Published: Sep 22,2023

Standard PCB

Download Gerber file 1

BOM(Bill of materials)

Centroid file

Other files for Assembly

PCBWay Donate 10% cost To Author

Only PCB

PCB+Assembly

Add to cart

*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.

Copy this HTML into your page to embed a link to order this shared project

Copy