Interface between a Kenwood amateur radio transceiver and external antenna tuner. First effort at board design. I used KiCad. The board works as expected electrically/signal flow wise. Inadvertently l...
This thing turned out awesome!
Good quality fabrication. There was a problem with misunderstanding the order requirements that was solved in a moderately professional way (a little bit slowly). The problem was that coating was ch...
Hi, We received these parts today and found that they are out of tolerance and some of them have pink on them. The length shown in the image is supposed to be 51.053 +-0.15mm(ISO 2768-1). I measured 1...
Every part of the order was done cleanly and professionally, was incredibly happy with the result. Customer service was especially prompt, courteous, and helpful.
Another great order experience! Parts are all within tolerance and have an excellent finish.
Complex geometry (small hole and slot) and multi sided machining came out perfectly.
These boards look great. Thank you!
My project is a general purpose/lab +15(-15V) power module break-out board with additional decoupling and +V -V LED status for current and future pro-audio testing and prototyping. My experience using...
Good quality fabrication. There was a problem with misunderstanding the order requirements that was solved in a moderately professional way (a little bit slowly). Chromium coating covers only outsid...
All features are within 0.4mm of spec. Arrived slightly wrapped. Due to a design error, the well in the center is too shallow for the 100mm Petri dish to sit in.
I am very satisfied with the PCB Boards I received. They were exceptionally well made to my ordered specifications and design. Now that I have the boards I see some minor issues in my board design ...
Project included built-in antenna, RFID IC, WIFI, LED's, ADC, and power management circuit. Everything was very well done and completed quickly. It would have arrived right on time, but a hurrican...
Boards came out perfect. And even early than expected! I've never designed a PCB with software before but the process of uploading and having it reviewed was a huge help. Thanks!! Made my Cypher C...
Complex geometry (small hole and slot) and multi sided machining came out perfectly.
Parts arrived fast and well packaged, all within tolerance, and look great! Excellent value for small prototype runs.
1 ... 25 26 27 28 29 30 31 32 33 34 35 ...