This SLA component is a consolidated housing/lightpipe into which a small PCB assembly is mounted. We were near elated with the high quality transparent material and the overall finish. Tolerances wer...
Hello, I requested 10 assembled and 10 unassbled units. I specifically requested the components for the 10 unassembled boards. Unfortunatly I received my package and the requested components were not ...
This was our first time having PCBWay manufacture and assemble circuit boards for my engineering consulting business. They did a great job on this test run and we have given them a larger project.
PCBWay supplied the 2-layer ENIG boards and stencil for my Crowd Supply campaign in 2022. Excellent quality, all boards worked perfectly, fast delivery.
Came out great, at a great price! Thank you!
My project is a general purpose/lab +15(-15V) power module break-out board with additional decoupling and +V -V LED status for current and future pro-audio testing and prototyping. My experience using...
Good quality fabrication. There was a problem with misunderstanding the order requirements that was solved in a moderately professional way (a little bit slowly). Chromium coating covers only outsid...
All features are within 0.4mm of spec. Arrived slightly wrapped. Due to a design error, the well in the center is too shallow for the 100mm Petri dish to sit in.
My 3-Output power supply does not have the standard 0.75" spacing for the binding posts, so this board slides over the binding posts and provides an offset hole for a banana jack that is properly spac...
It was my first time when i buy pcbs on yours site. Boards ale very good quality. I solder few by hand and everything works :) Thank you for best pcbs i have ever had Tom
Excellent quality and service
PCB's turned out beautifully and work great. Very pleased with the results!
Interface between a Kenwood amateur radio transceiver and external antenna tuner. First effort at board design. I used KiCad. The board works as expected electrically/signal flow wise. Inadvertently l...
This thing turned out awesome!
Good quality fabrication. There was a problem with misunderstanding the order requirements that was solved in a moderately professional way (a little bit slowly). The problem was that coating was ch...
Hi, We received these parts today and found that they are out of tolerance and some of them have pink on them. The length shown in the image is supposed to be 51.053 +-0.15mm(ISO 2768-1). I measured 1...
1 ... 22 23 24 25 26 27 28 29 30 31 32 ...