Very satisfied with the outcome! The distortion is minimal. Small features are very well reproduced. The mating surfaces function flawlessly. The module 1.0 helical gears mesh smoothly. One minor iss...
Perfect as usual. Yet another design rev but I think it's done with the next one.
Overall an excellent experience! Shipping box got pretty smashed up (DHL's fault) but the boards were packaged well enough to avoid damage. Super happy with the whole experience. Production speed wa...
In essence the outcome is good. But the unit is warped from one corner to the diagonal. See attachment. The lower right corner of the unit is not touching the surface and so as the diagonal corner ...
The tenon is about 0.3mm too narrow, resulting a poor fit over the holding ring. The bottom of the tenon fall off the mortise on the holding ring for about 1.6mm. The cut out on the other end for the ...
Even better than the first one! Works amazing thank you, issues over chat were fixed up in minutes! Order came a bit late but communication was perfect and arrived at a new expected date, you guys roc...
Quick and worked great for our education event. https://www.meetup.com/raspberry-meetup-pi/events/284622521/
perfect reindition of the sldprt file.
The project is for a Haptic wearable sensor (https://hackaday.io/project/185643-wearable-haptic-sensor). This PCB is allowing the team to use a common prototype board for our research into wearable ap...
I built an electric dune buggy and needed custom made bearing mounts for a custom idler shaft for the chain drive and reduction. The CNC bearing mounts were beautiful! All tolerances were perfect and ...
The pcb looks nice, quick service, accurate quoting, easy to use. i am looking forward to using the new KiCAD plug in next time, but it was just fine using classic gerber methods. The Silk screen is e...
So this is a case for the bakeneko60 keyboard essentially and it turned out to be a lot better than I expected. I got this 3d printed just to test out the tolerances of the case before I'm gonna get i...
The 3D print turned out pretty well! Both the internal and external threads fit perfectly. The vacuum seal the adapter and the bottle created is sufficient to run a 0.22 micron bacterial filter. The t...
No problems with thos board! Popped it in and it worked great, everything was handled fine and board arrived on time.
excellent machining in poly carbonate. no accidental burrs or other mishaps.
great threads on those
1 ... 24 25 26 27 28 29 30 31 32 33 34 ...