this is the top housing of the final prototype, it was aesthetically perfect, however the screw holes suffered some degradation on the threading, since they were not sealed before sandblasting. the pa...
thin pcb used to create a battery pack. Small connector to interface.
I can only say good things and pass on appreciation for the PCBWay team. This was my first attempt at a PCB and I made a few errors. The HELPFUL team at PCBWay fixed my mistakes. An example of my m...
PCBWay Engineering was very helpful by pointing out a through-hole error in my Gerber files. I revised and resubmitted the files. Once they had the corrected Gerber files, the PCBs arrived quickly a...
This is an interface board for SignalMaster to provide an electronic gong for Model Railroad grade crossings. Again an excellent job from PCBWaY.
These arrived in record time, they were great quality. everything lined up perfectly.
fantastic print, great detail, material is hard to screw into - need to redesign more generous openings for screws
fantastic print, no warping
this is a final prototype to see the finish quality and aesthetic properties of the part in this material, this part had no issues, and was fully functional and within spec.
It was great to work with PCBWay. The pcbs arrived on time and under budget. I would highly recommend working with them in the future. My package even arrived earlier than estimated. Thanks a ton!
This board upgrades Tandy 1000 EX or HX to 640K, adds an RS-232 serial port and an XT/IDE interface (with ROM). Gerber files found on GitHub. Boards look great and work as expected. Order arrived on t...
This board is used to plug into the SignalMaster PWB and provide loopback diagnostic tests to diagnose any problems with the assembly. This was used to verify the 100% correct operation of all of the ...
This is a project to provide interlocking block signaling for model railroads. It provides user configurability and options to use as railroad crossings and auto traffic signals as well as interlockin...
fantastic print, great detail, material is hard to screw into - need to redesign more generous openings for screws
FANTASTIC PRINT! The additional spray varnish helped make these parts friction fit. Looks lovely! Resin material does not accept screwing into. Need to find another method.
smol but still great detail
1 ... 28 29 30 31 32 33 34 35 36 37 38 ...