What would be the minimum channel and fin width you are capable of milling in copper. Total depth would be around 4.25mm. Are you able to mill a channel width less than 1mm and a fin width of 0.5-0.8m...
Hello,i upload a .step file for CNC milling. The original modell .step file is very fine in detailing but in the preview view the modell is very rought (a radius in the stepfile is not round its shows...
I'm looking to create a part with a very precise borehole with a radius of 3.2316 mm. The Goal here would be 1/100 mm tolerance or even better 1/1000 mm, depending on possibility and pricing. I was ju...
HelloI need a large gear wheel: modul 2,5 with 106 teeth (~270mm diameter) and 20mm width out of POM.Do you have the right tools to manufacture this properly ?Thank youMaurizio Baltes
When entering part specifications for a CNC machined part, I wanted to specify tolerances, however the options are only for bilateral (+/-) tolerances. I want to specify a positive, unilateral toleran...
Dear PCBWay,Maybe it is one of these stupid questions but will you be able to machine outer differential threads on a brass, thick wall pipe (it will be used for optics instrument) ? The threads will ...
Hi, I have a CNC Design I want done. Have uploaded step file. But because I have threaded holes it wants a technical drawing. Should I just design the plate and do a technical drawing showing center o...
