Results for "Raspberry pi"

Popular: Arduino Automation Commodore Iot Raspberry pi

FNAF Head control board for raspberry pi pico WH

Dev Dec 13,2025

I use it for a FNAF Foxy head it has 2 sockets for LED Common(-) RGB LED's which are tied to operate together and 2 sockets for 2 Servo motors and its compatible with the raspberry pi pico board and it has a AUX socket for things like a fan or a speaker for inside the head of your cosplay

Raspberry pi Robot Robotics

312

RasPiZero2W mounting board for PicoCalc

Dec 09,2025

This board was created for the "Raspberry Pi Zero 2 On PicoCalc" post on the PicoCalc forum.https://forum.clockworkpi.com/t/raspberry-pi-zero-2-on-picocalc/17946It's a great idea to replace PicoCalc's RaspPico with a RasPiZero2W.The idea was conceived by @wasdwasd0105, and details can be found at https://github.com/wasdwasd0105/picocalc-pi-zero-2.Thank you, @wasdwasd0105, for this great project._____In addition to the board, you will need the following items:A pair of 11mm 1x20 stacking male-fem...

DIY PicoCalc Raspberry Pi Zero 2 W

554

EavesDrum.io

Gunkel Nov 26,2025

EavesDrum is an open-source e-drum trigger module project designed for drummers and makers.It allows you to connect a multitude of drum pads or piezo triggers and convert their signals into MIDI events.The configuration of the module is simple and user-friendly, thanks to a built-in WebUI. You can adjust sensitivity, threshold, and other parameters directly from your browser—no need for complicated software or direct hardware programming.The trigger module acts as a USB MIDI device - simply conn...

Audio Raspberry Pi Pico Instrument

492

CM5/CM4 SO-DIMM Carrier with Jetson Compatibility

Nov 24,2025

This SO-DIMM card essentially let's you turn a CM5 into a NVIDIA Jetson card, turing RK1, and other compatible SO-DIMM standards! It's going to be used for my future server cluster motherboard! It's fully open source here!Custom Features!Jetson/Turing RK1/Radxa/etc compatible SO-DIMM connectorSupport for SD Card mountingGbE Ethernet1x PCIe Gen 3.02x USB 3.2 Gen 1 support, 1x USB 2.01x HDMI 2.02x 4-Lane MIPI CSIMisc buttons/LED'sPCB DesignThe CM5 SO-DIMM carrier is a complex 6-layer PCB, with the...

8th Design Contest-Electronic Project Hardware Raspberry pi

803

NES Retroachievements Adapter (Board 2)

Toledo Nov 16,2025

What’s it about?This is an open-source hardware adapter that brings online achievements (like Xbox or PlayStation trophies) to the original NES console, working with physical cartridges and no console modifications.Why did I decide to make it?I’m a retro gaming enthusiast who loves mixing old-school hardware with modern technology. While achievements have been available in emulators through the RetroAchievements platform, there was no existing solution for real NES consoles. So, I challenged mys...

NES Retroachievements raspberry pico

438

Mini SiPM Driver (Mini SiD) Board

NuclearPhoenix Nov 14,2025

Mini SiPM Driver (SiD) Board — Revision 4.xThis is the affiliate page for the Mini SiPM Driver (SiD) project.NOTE: THIS IS A 4 LAYER BOARD!You can easily order the PCB directly through PCBWay using this page — it helps support the project a little, and doesn’t cost you anything extra. All design files are fully open-source and available on GitHub.About the ProjectThe Mini SiPM Driver (SiD) is a compact, minimalistic board that allows you to easily integrate a silicon photomultiplier (SiPM) into ...

DIY Arduino Sensor

1005

Open Gamma Detector

NuclearPhoenix Nov 10,2025

Open Gamma Detector — Revision 4.2 (Pico 2)This is the affiliate page for the Open Gamma Detector.NOTE: THIS IS A 4 LAYER BOARD!You can easily order the PCB directly through PCBWay here — it helps support the project a little, and doesn’t cost you anything extra.The main open-source project with all hardware, firmware, and documentation is hosted on GitHub.About the ProjectThe Open Gamma Detector is an open-hardware all-in-one gamma spectrometer, designed to be hackable, affordable, and powerful...

Raspberry pi Sensor Arduino

1475

RetroCam 1

Domonkos Nov 07,2025

The tutorial will be expanded and updated if there is a high demand for it.

8th Design Contest-Electronic Project retro camera

856

OpenGammaKit Enclosure, Assembly Parts, Assembly Guide

Vikulin Nov 01,2025

OpenGammaKit 3D models for printing and complete spectrometer assembly. Size: ⌀45mm, 166mm length. Crystal dimension: 30mmX33mm.Parts to assemble:OpenGammaKit PCBs, link3D printed Enclosure, linkCable Gland, 2-4.5MM, M8X0.75, linkCable Baseus Type-C to Type-C 100W (2m), linkConn Plug Micro USB TYPE B, linkResistor 5.1kOm, 0.25WBlack ⌀50 mm Heat Shrink Tube 2:1 Polyolefin Cable Sleeve Insulated Wire Sleeve, linkEpic-Crystal NaI(Tl) scintillation crystal, 30mmX30mm(1inchX1inch) linkRepository ==&g...

DIY Raspberry pi USB

201

Xbox Controller with ESP32

Arnov sharma Oct 31,2025

Greetings everyone and welcome back. here’s something I’ve been really excited to share.I’ve been working on a simple but powerful setup that connects an Xbox controller to an ESP32-C6 DevKit over BLE and displays all the input data live on an ILI9341 SPI screen. It started as a way to visualize controller input—buttons, triggers, and analog sticks—in real time. But once I saw how responsive it was, I realized this could be much more than just a visualizer.The real reason behind this build is a ...

8th Design Contest-Electronic Project Arduino ESP8266

2359

1 2 3 4 5 6 7 8 9 10 11 ...

Popular Creator

Pmanapon

Excellent Engineer

Project: 1 Followers: 15

hackup.net

Excellent Engineer

Project: 17 Followers: 123

Anthony Chiam

Excellent Engineer

Project: 1 Followers: 5

McAleer

Excellent Engineer

Project: 2 Followers: 8

agoktugaydin

Excellent Engineer

Project: 2 Followers: 5

Popular Project

Bruce RF Reaper PCB

Explore!https://bruce.computer MCU ESP32 S3 N16R8BATTERY 1000MAH6 WAY BUTTONAW9523 IO EXPANDERNRFCC1101 433MHZNFC ST25R3916VIBROBUZZERIR TX RXIBUTTONSDCARDLEDGPSFLIPPER ZERO HEADER COMPATIBL...

The Sesame Robot Project

What is Sesame?Sesame is a 3D-printable quadruped robot powered by an ESP32. It runs on 8 MG90S metal-gear servos (two per leg) and features a 128x64 OLED display for a face. It walks, dances, waves, ...

Self-Balancing Robot PCB

This is the PCB for the self-balancing robot seen in this video: https://youtu.be/K1lzzVGCzAQModel can be fully 3D printed at this link (zero supports required): https://www.printables.com/model/15335...

AERIS-10 Open Source Phased Array Radar

The AERIS-10 is a low‑cost open‑source phased‑array radar platform designed for makers, researchers and educators. Operating around 10.5 GHz, the system can detect and track multiple objects at ranges...

AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System

After scrutinizing pioneering research papers on AI-powered applications and improvements for restaurant food preparation and delivery, I had become fascinated by the prospects of AI-oriented solution...

Hot Project Tags

Space Exploratio Virtual reality Microcontroller DIY Synthesizer Weather Station Synthesizer Antenna TVC

The PCBWay that recognize the talent and effort of the best ELECTRONIC designers in the World.