1. Blog>
  2. How to Generate Gerber and Drill Files in Altium Designer 23.5.1

How to Generate Gerber and Drill Files in Altium Designer 23.5.1

by: Jul 06,2023 7376 Views 2 Comments Posted in PCB Design Tutorial

Tutorial PCB design Gerber Altium Design

Gerber Files

Select the menu bar, click "File"->"Fabrication Outputs"->"Gerber Files", as shown in the figure below.

After clicking, the Gerber Setup interface will appear. Refer to the red boxes in the figure below to select the Layers to plot page, and click "Plot Layers"->"Select Used".

On the Advanced page, select as shown below.

Click Apply, and the pop-up .Cam project file can be closed directly without saving.

Drill Files

Select the menu bar, click "File"->"Fabrication Outputs"->"NC Drill Files".

After clicking, the NC Drill Setup interface will pop up, select as shown below and click OK.

Import Drill Data Page appears, keep the default setting and click OK.

The pop-up .Cam project file can be closed directly without saving.

So far, both Gerber files and drill files have been exported. As shown below.

Join us
Wanna be a dedicated PCBWay writer? We definately look forward to having you with us.
  • Comments(2)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
    Back to top