Shrinkage of injection molded parts refers to the phenomenon of dimensional reduction of plastic parts after cooling during the injection molding process. This is due to the volume contraction that oc...
Thermosetting PlasticsThermosetting Plastics are polymers that irreversibly cure to form a rigid structure when heated or chemically treated. Once set, these materials cannot be melted or remolded. Th...
Introduction:UL 94 is a standard established by Underwriters Laboratories (UL) to evaluate the flammability of plastic materials used in devices and appliances. It provides a classification system bas...
SPI mold surface finish: Surface finish of injection molded parts. The surface finish of injection mold on injection molded plastic parts is copied. Therefore, product designers need to convey the sur...
What is injection moldingThe injection molding process requires an injection molding machine, raw plastic material, and a machined mold. The raw plastic material is first melted in the injection unit ...
The Basics Of Injection Molding ServiceInjection molding is one of the most often-used manufacturing processes for creating plastic parts. Thanks to its high-precision, repeatability, and cost efficie...
Ranking | Name | Answers |
---|---|---|
1 | Sudo Net | 2 |