1. Blog>
  2. Raspberry Breadstick

Raspberry Breadstick

by: Dec 15,2023 740 Views 0 Comments Posted in Engineering Technical

Microcontroller Boards Raspberry Breadstick Crowdfunding Project

Raspberry Breadstick is a uniquely designed development board that is long and tidy. Whether you are looking to build anything, you can start prototyping using microcontroller development boards and breadboards. When using traditional development boards, the issue of messy jumper wires often arises. With Raspberry Breadstick, this problem can be largely avoided as the I/O pins stretch along the length of the breadboard, eliminating the need for long jumper wires. This provides a clean prototyping experience, allowing users to understand and troubleshoot more conveniently.

Arduino Uno + breadboard

Raspberry Breadstick + breadboard

Even without the need for messy jumper wires, Raspberry Breadstick can still be a valuable companion for experienced enthusiasts and engineers.


Code with Ease in Python

Raspberry Breadstick supports CircuitPython and MicroPython, offering a comfortable coding experience. The use of Python, with its beginner-friendly syntax, meets the diverse needs of users across various industries. Furthermore, Breadstick is also compatible with the Arduino programming language.


Explore Novel Features

Raspberry Breadstick comes loaded with many exciting components to ensure your exploration experience is filled with fun. For instance, control 24 vibrant RGB LEDs using the Adafruit DotStar library or the FastLED library. Gather rotation and accelerometer data from the 6-axis IMU, and then open up LED POV, where the display reacts to every move as you swing the breadstick in the air!


Maximize Pin Utility

The design philosophy behind Raspberry Breadstick is all about convenience, and its strategic pin spacing ensures the efficient utilization of every available pin. This helps maintain a tidy and organized layout of components, providing a well-structured workspace without the need for long jumper wires to connect each component.


Features & Specifications

Powerful RP2040 Microcontroller

  • Dual ARM Cortex-M0+ @ 133 MHz Clock
  • No EEPROM
  • 264 kB on-chip SRAM
  • 16 MB Flash (External IC)

I/O support

  • Native USB support
  • Read-Only Boot ROM initializes device as USB drive, eliminating need for external programming hardware
  • 4 x 12-bit ADCs
  • 18 x GPIO Pins rated for 3.3 V
  • Hardware Serial, I2C, and SPI support
  • One-Wire support via CircuitPython's adafruit_onewire library
  • MIDI support via CircuitPython's usb_midi library

6-Axis IMU

  • LSM6DSMTR
  • Accelerometer: X, Y, Z
  • Gyroscope: Roll, Pitch, Yaw

Onboard RGB LEDs

  • 24 SK9822 addressable LEDs
  • DotStar Compatible with Separate Data & Clock Pins
  • Powered by 5 V rail

USB-C with Power Delivery

  • Can request up to 3 A at 5 V from USB-PD devices e.g. computers, wall-adapters, portable power banks
  • There is a 3A PTC fuse on board for overcurrent protection
  • The voltage is regulated down to 3.3 V (600 mA) for the microcontroller and user devices

Compact Layout

  • Measures 0.4" x 6.45" x 0.2" (10 mm x 164 mm x 5 mm) without headers
  • Lean format leaves 4 breadboard holes clearance on either side of the breadstick


Check CrowdSupply Raspberry Breadstick for more info and welcome to support it if you are interested!


Join us
Wanna be a dedicated PCBWay writer? We definately look forward to having you with us.
  • Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
    Back to top