This is a combined iPhone 6 / 6s / 7 Plus stand that also takes the charging puck for your Apple Watch to display your watch in Landscape Mode so it works with the Night Stand display.

I designed it so that the headphone jack on the 6 plus is accessible when it is on the stand. It frustrated me that none of the stands on the market allowed me to plug my headphones in when in bed.

I've also designed it to be modular, so that it could be easily adapted to different devices. It accomplishes this in the following ways:

• The Lightning Connector holder (PhoneStandAdapter) is separate and plugs into the Watch Stand (PhoneWatchHolder) so different ones can be developed. It will snugly fit the original Apple Lighting cables, but third party cables may not be snug fitting
• The Phone Bracket (PhoneStandHolder) at the top of the Vertical Stand (PhoneStandStand) is separate so different width ones can be created for different phones. The supplied one will take a 6 / 7 plus with a case

The stand needs the original Apple iPhone Cable (others may fit) and the original Apple Watch Puck (42mm). The Lightning cable is fed into the back of the base in the channels provided, then move up through the Base and Watch Stand and then then pushed into the PhoneStandAdapter. The Watch Puck is fed down into the PhoneWatchHolder, then into the PhoneStandBase and our the back under the channel in the base. The Puck will need securing to the Watch Stand using something like Blue Tack to hold it tightly in place. The phone cable feds up the Watch Stand then into the little adapter, with the adapter then pressed into the Watch Stand.

When I get a chance I will design a PhoneStandHolder to fit the smaller iPhone 6 / 7 (none Plus). If you have any other requests, let me know in the comments.

I hope you find it useful.