Hello friends today I am going to share a circuit with you the purpose of making this circuit is to prevent wastage of electricity and water this circuit is very simple and cheap it uses very common components Like a relay LED and an IC. The way this circuit works is very simple.

This circuit works like this. When your tank is about to run out of water, the bell will turn on and now Just press a button which will start your water pump and the bell will stop and it will also show you the level with the help of LED and now when the tank is about to fill up. Your water pump will stop again and the bell will start ringing then you have to stop the bell and then when the water runs out again your bell will go off again then you ring again. has to be closed and the cycle will continue like this

water is every day need and useable water is limited

So decide to start a campaign for saving water .

I design this device to automate water pump and also monitor water level of water tank.

All the link and files are given blow

If you wants more projects like this one plz subscribe our YouTube channel