Top Solder Mask
Top Paste Mask
Top Overlay
Top Copper Layer
Keep Out Layer
Bottom Solder Mask
Bottom Overlay
Bottom Copper Layer
Bottom
Top
daisy-chain 4digit 7-segment SPI module
### DESCRIPTION
generic ebay/aliexpress modules do not have a 'feedthrough' .... so this is the pcb i designed to be able to loop through a number of SPI modules.
this is my first time designing and ordering a pcb so it will be quite a learning process.
### TECHNICAL DETAILS / COMPONENTS
uses 2 jellybeam 74HC595 in the SOIC version
because of space requirements current limiting resistors are omitted in rev1 and instead the limited current delivery of the 74hc595's i/o in combination with multiplexing is used.
>later revision intended to solve this with a 4 layer pcb/ expanded board.
v1 is designed for a 4 digit 0.56 inch display
### LEARN / TOPIC / BUILD INSTRUCTIONS
v1 to be assembled by hand by me ; but the 74hc595 chips could be reflow soldered on.
daisy-chain 4digit 7-segment SPI module
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(2)
More by Kevin Miedema
-
A Compact Charging Breakout Board For Waveshare ESP32-C3
366 3 4 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
381 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
589 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
617 0 1
