Zigbee multi sensor
My project allows using cheap Ebyte E18-MS1-PCB CC2530 modules for smart home sensors with Zigbee2MQTT.
It is possible to connect various sensors: sensor for opening doors and windows, sensor for temperature, humidity, atmospheric pressure, motion sensor, light level sensor and various other digital and analog sensors. All this is available at a low manufacturing cost. You can do the firmware yourself, through the firmware designer on the website ptvo.info. Housings with dimensions of 33x30x10mm were designed for these universal sensors.
If you liked the project, then you can rate it above.
My article describing the project (in Russian).
Zigbee multi sensor
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(18)
- 4 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
-
10design
-
10usability
-
10creativity
-
10content
-
9design
-
10usability
-
10creativity
-
9content
-
10design
-
10usability
-
10creativity
-
10content
More by Rozenrod
-
A Compact Charging Breakout Board For Waveshare ESP32-C3
482 3 4 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
489 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
684 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
673 0 1
