Atari Joystick to Sinclair Spectrum +2 or +3 PCB
I got tired of wiring these so decided to create a board with a very small footprint which still allows 2 joysticks to be plugged in at once.
Just a male and female DB9 edge connector to the marked ends and ready to go.
Footprint is so small projects can be made nice looking with some milliput and heat shrink
Atari Joystick to Sinclair Spectrum +2 or +3 PCB
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(3)
More by DBH Retro
-
Atari Joystick to Sinclair Spectrum +2 or +3 PCB
I got tired of wiring these so decided to create a board with a very small footprint which still all...
-
Sinclair ZX Spectrum +2 and +3 Joystick Adapter Board
I got tired of messy wiring and decided on a simple PCB to correct this, its small foot print works ...
-
Programmable Mist Maker - XIAO / QT PY Extension
1015 2 1 -
RadioHAT - Raspberry Pi radio development platform
820 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3277 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3901 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4278 2 2
