Bottom Soldermask
Top Soldermask
Bottom Copper
Bottom Silkscreen
Top Silkscreen
Top Copper
Bottom
Nerdwatch V1.1
### DESCRIPTION
This is the improved version from the same watch in the last post. There were some misstakes i made so i need to fix them. The ISP conector can be now solderd directly on the Watch, some pads were aravible for corrections if e.g. the Fuse bit for the Oszilator set wrong and the Push button have a Condensator to reduce the toggle when pressing it.
https://www.pcbway.com/project/shareproject/Nerdwatch_V1_0.html
Nerdwatch V1.1
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(5)
- Likes(1)
More by Skorpion-31-3
-
Nerdwatch V1.1
### DESCRIPTIONThis is the improved version from the same watch in the last post. There were some mi...
-
Nerdwatch V1.0
### DESCRIPTIONThis is my first build from a watch based on sk6812. Like other watchs it shows the t...
-
Atmega16 learning board
### DESCRIPTIONIts a learning board for students. The next Projekt is an io board for this.### TECHN...
-
Programmable Mist Maker - XIAO / QT PY Extension
1416 2 1 -
RadioHAT - Raspberry Pi radio development platform
1193 0 3 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3557 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4231 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4612 2 2
