50_MHZ_ARDUINO_BEACON
This project is a 1w Beacon working in the 50 Mhz band made with Arduino and Si5351. The circuit can be improved. Arduino file has been shared. Using this, you can make a Beacon on the frequency you want. I wish you success.
50_MHZ_ARDUINO_BEACON
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Hudaverdi Gunes
-
50_MHZ_ARDUINO_BEACON
This project is a 1w Beacon working in the 50 Mhz band made with Arduino and Si5351. The circuit can...
-
ICOM BAND DECODER
All Icom HF and HF/VHF transceivers (except for the IC-701) provide an analogue band-selection volta...
-
50 MHZ 10WATT PA
I have been doing beacon studies on 50 MHz for a long time. I decided to design a PA for my b and 2w...
-
-
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
325 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
382 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1484 0 3
