JD Teensy Breakout V1.0 - Breakout board for Teensy 3.2
What is it?
This board allows easy access to I/O pins with ground and voltage rails nearby.
Why did you make it?
This was made for a specific project where I needed to plug in sensors easily, with access to Teensy's input pins, voltage and ground nearby. However, this board could also be used for some other applications.
What makes it special?
There are some other breakouts out there, but this one offers a balance of size and functionality that others do not.
What is not included?
Includes only the PCB. Size is 38mm X 53mm. It does not include a Teensy or anything else.
Please note:
This is my first ever board, so there are some improvements I'd like to make. Things to know: - Holes are 0.762mm, so a bit tight, but the Teensy footprint is correct, and everything works as it should. Recommend needle nose pliers to gently place your headers. - Ground trace is a bit thin, so be careful not to blow it! - I purposely designed this to only handle the pins along the edges, so if you need access to the pins underneath the Teensy, you may want to try another board. - Should fit other Teensy 3.x boards, but was made for 3.2.
JD Teensy Breakout V1.0 - Breakout board for Teensy 3.2
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
10design
-
10usability
-
10creativity
-
10content
More by Jeremy dePrisco
-
-
X-mas ball, Now with ANIMATED LIGHTS!
25 2 2 -
-
-
-
RC radial engine spark plug heater
17 0 0 -
-
-
Black Falcon FPV EDF RC Plane! Only free on pcbway!
89 0 0 -
RCTESTFLIGHT Propeller Design Competition
109 0 0