|
KiCad 8.0KiCad
|
wart_zapper.kicad_pcb
The theory of operation is that a signal at a specific frequency and amplitude destroys the virus cells responsible for the wart, thereby eliminating it. I originally made one of these years ago for a friend who could not get rid of a wart that was on his foot. He had it cut off, frozen off, and burned off, but it always came back. He used the one I made, and it worked, and it never came back. I wanted to make one on a real PCB.
wart_zapper.kicad_pcb
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Glenn A Hamblin
-
Programmable Mist Maker - XIAO / QT PY Extension
1829 2 2 -
RadioHAT - Raspberry Pi radio development platform
1559 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3791 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4542 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5344 2 2 -
