|
Autodesk Fusion 360Autodesk
|
VESA mount for Siglent SDS8xx oscilloscope
Divided to fit on a regular-sized printer, this VESA mount fits the Siglent SDS8xx oscilloscopes.
- feet fit through the base
- two halves join together with locating pins and up to four M3 bolts
- handle snaps down over tabs so that the scope can't fall out
- 5" 128mm cabinet handle can be put on the front to move it around
- M3 inserts can be put in either side to add an accessory tray or probe rack (which I haven't designed yet)
- M4 inserts are used in the VESA 100mm spacing pattern to attach to a VESA mount
Mine is printed in PETG-CF and seems very tough. Probably plain PLA or PETG would be OK too.
VESA mount for Siglent SDS8xx oscilloscope
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Adam Eberbach
-
Atari 800 side panel for Sophia 2 with HDMI, audio, button
This side plate allows you to mount a PCB with HDMI, audio and a switch inside your Atari 800, it is...
-
VESA mount for Siglent SDS8xx oscilloscope
Divided to fit on a regular-sized printer, this VESA mount fits the Siglent SDS8xx oscilloscopes.fee...
-
Amiga 1200 keyboard A1200.net keyboard mounting parts
If building the Amiga 1200 keyboard and you have an A1200.net case for your Amiga, these are the sup...
-
Amiga 1200 Keyboard for MX switches
I was an Amiga user back in the day... had a 1000, then a 2500 (then sadly the demands of work requi...
-
Atari Sophia 2 video HDMI/stereo board
If you have a Sophia 2 in your 8-bit Atari then you may prefer HDMI to DVI. This board does that, re...
-
Programmable Mist Maker - XIAO / QT PY Extension
1279 2 1 -
RadioHAT - Raspberry Pi radio development platform
1091 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3483 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4138 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4512 2 2
