|
KiCADKicad
|
TI-99/4a Tipi32k
TIPI/32k is a derivative of the original TIPI designed by Jedimatt42 and ElectricLab, but modified to fit in the TI-99/4A speech synthesizer housing. It combines both the sideport TIPI and the sideport 32K memory expansion into a single PCB.
Make a smaller, simpler package for the TIPI, matching the original factory TI-99/4 look and feel.
Reduce cost by integrating the TIPI and 32K cards, using the Pi ZeroW, and designing for low cost production and simple assembly.
Getting more TIPIs in the hands of us casual TI-99/4A users.
TI-99/4a Tipi32k
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(14)
- Likes(7)
More by mike danick
-
UnoCart 2.6k v1.52 w/ TAG-CONNECT and 2.54mm Header for programming
Latest version of UnoCart 2.6k. Allows you to play Atari 2600 ROMs on your real Atari 2600. Also mad...
-
Extadapter for Apple ][ PicoVGA
This project includes two PCBs. This one is the extadapter PCB. If you need the Apple ][ PicoVGA PCB...
-
Atari UltimateCart
The Ultimate Cart is an SD-card based multicart for the Atari 8-bit.It allows you to browse the SD c...
-
Apple ][ PicoVGA
This project is a VGA card for Apple II/II+ and //e computers to output a crisp RGB signal to a VGA ...
-
TI-99/4a Tipi32k
TIPI/32k is a derivative of the original TIPI designed by Jedimatt42 and ElectricLab, but modified t...
-
TI-99/4a FinalGROM99
The TI 99/4A FinalGROM Cartridge, or FinalGROM 99 for short, is a cartridge for the TI 99/4A home co...
-
UnoCart 2.6k
Latest version of UnoCart 2.6k. Allows you to play Atari 2600 ROMs on your real Atari 2600. Also mad...
-
UnoCart 2600 v1.03
** THIS PROJECT HAS BEEN RETIRED. SUPPORT IS NO LONGER 'SUPPORTED' **** GERBERS AND CENTROID FILES A...
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
230 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
237 0 1 -
-
-
