Bottom
Sunny clock (nixie tube clock at IN-14).
This is a project of nixie tube clock.
6 IN-14 lamps and Atmega-8A microcontroller were used.
In more detail you can get acquainted with the project here (information in Russian, but you can always use Google translator).
https://www.radiokot.ru/forum/viewtopic.php?f=25&t=29456&start=1180
Thanks for attention!
Sunny clock (nixie tube clock at IN-14).
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Alexander Antonov
-
Unbal to bal.
This device was created specifically for analyzers Rig Expert.It allows you to make a qualitative me...
-
SWR and Power meter.
This device is designed to measure the SWR and the current transmitter power.You must use an externa...
-
Sunny clock (nixie tube clock at IN-14) part 2
This is a project of nixie tube clock.6 IN-14 lamps and Atmega-8A microcontroller were used.In more ...
-
Sunny clock (nixie tube clock at IN-14).
This is a project of nixie tube clock.6 IN-14 lamps and Atmega-8A microcontroller were used.In more ...
-
CMOS iambic keyer
This is a printed circuit board for the legendary telegraph key design of Ted Theroux N9BQRead more ...
-
Programmable Mist Maker - XIAO / QT PY Extension
1079 2 1 -
RadioHAT - Raspberry Pi radio development platform
895 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3338 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3949 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4338 2 2
