Solderocket
Regular solder paste dispensers must be connected to compressed air which you can provide with huge compressor. As a maker I can not run a large compressor in my room because of its noise and footprint.
Stencils might be a solution but for small size PCB work they are too dirty and I don't like to touch the chemical solder paste with my hands and with my tools. It takes more time to clean up everything than apply it to the PCB.
That's why I decided to design a desktop solder paste dispenser that is clean, easy to use and small in size. I called it Solderocket.
Using the rotary knobs, the time and pressure can be set so that the right dot size can be selected for each type of solder paste.
This device is indispensable when working with SMD on a regular basis. SMD paste can be dosed very accurately and quickly. Adhesives can be used in addition to SMD paste.
Solderocket
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Nuri Erginer
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
378 0 0 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
726 3 6 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
703 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
922 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
782 0 1
