Sodering Station Hakko DIY
This board is a simple and inexpensive soldering station for beginners. The components are ordinary, cheap, easy to buy (even from recoveries) and any engineer/technician begginer in electronics should make this soldering station instead of buying one. The pcb has small dimensions (50mmx60mm) and can be mounted in any case. You can use any letcon that is powered at 24V.
Sodering Station Hakko DIY
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(3)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
9design
-
9usability
-
9creativity
-
9content
More by Eduard
-
Battery Car Charger
This is a very simple and inexpensive battery charger. It has reverse polarity protection with MOSFE...
-
2X100W STEREO AMPLIFIER WITH 2N3055 OR TIP3055
A simple, powerful amplifier for a room and requires a minimum number of components. It is stereo an...
-
Sodering Station Hakko DIY
This board is a simple and inexpensive soldering station for beginners. The components are ordinary,...
-
Programmable Mist Maker - XIAO / QT PY Extension
1404 2 1 -
RadioHAT - Raspberry Pi radio development platform
1181 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3547 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4223 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4600 2 2
