Skunkboard rev3 – Atari Jaguar USB Development Cartridge
This is just sharing the Skunkboard project from https://github.com/tursilion/skunk_pcbs; all credit goes to the original designers, who released it to the public domain. The Skunkboard is a development cartridge for the Atari Jaguar that plugs into the cartridge slot and connects to a PC over USB. It lets homebrew developers upload and run code on real hardware and keep it in 8 MB of on-board flash.
The board uses a Cypress EZ-Host USB controller, a Xilinx XC9572XL CPLD that connects it to the Jaguar’s cartridge bus, and an AT49BV642D 64 Mbit flash. It also has two USB-A host ports and a mini-USB device port. This is revision 3, a 4-layer 94 × 37.5 mm board with hard-gold bevelled edge fingers, originally designed in FreePCB.
Boards come back blank: the CPLD and flash have to be programmed afterwards with the Skunkboard software, which is not part of this repository. Some of the 2007–2010 parts, especially the flash chip, may be hard to source today, so check availability before ordering assembly.
IMPORTANT (I had help from AI)
Before you order:
--Flash chip U3 (AT49BV642D-70TU): this is the main sourcing risk. The designer’s own 2010 parts list already marked it “Not available” at DigiKey. I couldn’t check current availability because web access is off here.
---Other old chips: U1, U2 and U4 are 2007–2010 parts, so check those too. Don’t swap U4 for a TPS2149: from rev1 on, the board is laid out for the TPS2159.
---C17: the designer flagged this capacitor as taller than the original part. Check it fits inside the cartridge shell.
--Edge fingers: they need hard gold with a 30° bevel, and the readme says not to use tie-bar plating. The inner copper layers also run to 1 mm from the finger edge. Confirm both with PCBWay.
--Programming: the boards arrive blank. The CPLD and flash have to be programmed with the Skunkboard software, which isn’t in this repo.
Skunkboard rev3 – Atari Jaguar USB Development Cartridge
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Engineer
-
Dreamcast Serial Adapter – CP2102N USB-C
This is just sharing the project from https://github.com/cepawiel/dc-serial – all credit goes to the...
-
DreamPicoPort – 4-Port Dreamcast Controller to USB Adapter
This is just sharing the project from https://github.com/OrangeFox86/DreamPicoPort – all credit goes...
-
PicoDreamcast – PicoPSU Power Adapter for Sega Dreamcast
This is just sharing the project from https://github.com/chriz2600/PicoDreamcast – all credit goes t...
-
DC2VGA – Dreamcast SD/VGA RGB Dongle Horizontal_PCB
This is just sharing the project from https://github.com/jeffqchen/DC2VGA – all credit goes to the o...
-
DC2VGA – Dreamcast SD/VGA RGB Dongle Vertical_PCB
This is just sharing the project from https://github.com/jeffqchen/DC2VGA – all credit goes to the o...
-
Dreamcast VGA Adapter – Switchable VGA / RGB / TV
This is just sharing the project from https://github.com/nunosousa/DC_VGA_Adapter, designed by Nuno ...
-
50-Pin BTB Breakout for Sega Dreamcast (GDEMU on VA2)
This is just sharing the project from https://github.com/albalog-cloud/50-pin-breakout-Dreamcast, de...
-
Dreamcast GDEMU FFC Adapter
This is just sharing the project from https://github.com/programmerta/dreamcast_gdemu_ffc, designed ...
-
Shiba GD-IDE – IDE Hard Drive Adapter for Toshiba Dreamcast GD-ROM Drives
This is just sharing the project from https://github.com/pyroesp/Shiba-GD-IDE, designed by pyroesp a...
-
Maple Bus Breakout Board for Sega Dreamcast
This is just sharing the project from https://github.com/Zeigren/Maple-Bus-Breakout, designed by Zei...
-
openGDROM – FPGA + MCU Development Board for the Dreamcast G1 Bus
This is just sharing the project from https://github.com/Zeigren/openGDROM-PCB, designed by Zeigren ...
-
Bus Breakout Board for Sega Dreamcast
This is just sharing the project from https://github.com/Zeigren/G1-Bus-Breakout, designed by Zeigre...
-
FC ROM Vomitter – Wi-Fi Upload NROM Cartridge for Famicom (ESP32-S3)
This is just a share of the FC ROM Vomitter (nescart-fc Rev A-FC) project by Keitark. All credit goe...
-
FamiCom UNROM512 PRGRAM
This is just a share of the FC-UNROM512-PRGRAM project by ponchick. All credit goes to the original ...
-
FamiCom DiscreteCart
his is just a share of the FC-DiscreteCart project by ponchick. All credit goes to the original auth...
-
Holy Diver – Famicom Cartridge PCB with Off-the-Shelf SMD Parts
This is just a share of the Holy-Diver project by J. Brink (Brink-J). All credit goes to the origina...
-
fc-magicon (rev0.2)
This is just a share of the FC-MAGICON project by SHIMA-R7. All credit goes to the original author, ...
-
FAMICOM cart breakout board
This is just a share of the FAMICOM_PROVE_CART project by antarcticlion. All credit goes to the orig...
-
-
-
-
BorePilot - ESP32-S3 Smart Borewell Pump Controller
341 0 0 -
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
489 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
475 0 1 -







