This is a design for a Christmas decoration to hang on your Christmas tree. It is made from two PCBs so that we could get green for the tractor and red for Santa's clothes.

I made this project simply because I wanted to have a go at making some PCB art after seeing some great examples on the PCBWay website. I also wanted to get started developing projects with the Padauk microcontrollers so the lower PCB is set up for a 14pin micro which will flash some white LEDs around the "Merry Christmas" text. These could be wired permanently on if flashing was not required.

It's powered by a CR2032 battery and there are eight 0805 LEDs shining through holes in the PCB. There is also a hole for a 3mm LED to act as the tractors headlight.

I hope you will enjoy this project, stay safe and have a great Christmas!!