DESCRIPTION

A project which makes easier to use a STM32F103 Microcontroller on a breadboard.

TECHNICAL DETAILS / COMPONENTS

All the components on this board are easy to source. 

The MicroUSB port on this board is from lcsc.com, and it does not have an MPN. The LCSC part number is C46389. Link down below: 

https://lcsc.com/product-detail/USB-Connectors_Jing-Extension-of-the-Electronic-Co-LCSC-MICRO-5PFemale-BType-all-posts-Short-needle-High-temperature_C46389.html

The debug port is 10-pin Cortex Debug Connector which defined by ARM. Any surface mounted 1.27mm 2*5 connector should work. Specification down below: 

http://infocenter.arm.com/help/topic/com.arm.doc.faqs/attached/13634/cortex_debug_connectors.pdf

List of components: 

1 * TSX-322516.0000MF09Z-AC

1 * TLV1117LV33DCYR

1 * STM32F103C8T6

1 * 1K5 0.1W 5% 0603 (1608 Metric)  SMD

1 * 10K 0.1W 5% 0603 (1608 Metric)  SMD

1 * ARM SWD Debug Pin

1 * C46389 (USB-B 2.0 Micro Receptacle)

3 * CAP 100nF 6.3V 20% 0603 (1608 Metric) Thickness 1mm SMD

2 * CAP 12pF 10V 10% 0805 (2012 Metric) Thickness 1mm SMD

2 * CAP 1uF 6.3V 20% 0805 (2012 Metric) Thickness 1mm SMD