|
Cadsoft Eagle |
SNES controller adapter for Atari 2600 (DB9)
I designed this adapter primarily for my game - Berta and Butterflies. I wanted to make controlling experience more similiar to the "Game & Watch" consoles and be able to move the character to any corner using only one button.
However, the adapter has also a different mode. You can switch the mode by pressing Start+Select at the same time. In this mode it will work as a normal adapter. It means that the arrow keys will work as joystick directions and "Y" button as fire.
Parts list:
IC1 - Atmega8, Atmega48 or Atmega88 microprocessor
R1 - 10kOhm
C1 - 100nF
X1 - female DB9 connector
U1 - SNES controller socket
SNES controller adapter for Atari 2600 (DB9)
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(4)
- Likes(5)
More by Slawomir Krysztowiak
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
153 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1004 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
575 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3045 2 3 -
RadioHAT - Raspberry Pi radio development platform
2591 0 4 -
-
-
