|
211-1-20-003CNC Tech
|
x 1 |
|
DiptraceDiptrace
|
|
|
|
Dataman 48 Pro 2Dataman
|
SN74S471 to SN74S472 ADAPTER
Adapter to program a SN74S471 on a Dataman 48 Pro 2 Programmer
(the SN74S471 is not supported by default on the Dataman 48 Pro 2 but a small adapter permit to read and program them
as if they were a SN74S472 [supported])
Install a DIP 20 socket on the top of the PCB and two row of 10 pin on the bottom of the PCB
To Read or program select SN74S472 on the programmer but think to limite the read/write range to the first 256 bytes
(just change the value on the parameter dialogue box opening when you try to do an operation)
SN74S471 to SN74S472 ADAPTER
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by didier derny
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
422 0 0 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
778 3 6 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
755 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
968 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
856 0 1
