Top Solder Mask
Top Overlay
Top Copper Layer
Bottom Solder Mask
Bottom Overlay
Bottom Copper Layer
Keep Out Layer
Bottom
Top
Running/Chasing LED using NE555 and CD4017
This is a simple project to make a running/chasing LED using NE55 and CD4017
Parts Required : 1. R1,R2,R3 = 1K 2. Pot = 50K 3. U1 = NE555 4. U2 = CD4017 5. C1,C2 = 10uf 25V 6. LEDs = 10white + 1Red
Learn how to make one here:
https://www.youtube.com/watch?v=3niZdeWKpWU
Running/Chasing LED using NE555 and CD4017
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(6)
- 3 USER VOTES
- YOUR VOTE 0.00 0.00
-
1design
-
2usability
-
3creativity
-
5content
-
2design
-
4usability
-
5creativity
-
6content
-
8design
-
9usability
-
10creativity
-
10content
-
Programmable Mist Maker - XIAO / QT PY Extension
1085 2 1 -
RadioHAT - Raspberry Pi radio development platform
907 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3343 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3956 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4342 2 2
