### DESCRIPTION

This is an Arduino UNO shield which was designed to ease the flashing process of the ESP01 module. When I started programming this module, the process was sort of messy and complicated. Required a lot of wire jumpers along the breadboard, the ESP01, and the Arduino UNO. Using this shield, it will require just placing some jumpers to flash the WiFi module.

Moreover, this shield can be used to connect the Arduino UNO to the cloud through the ESP01 using AT commands. 

### TECHNICAL DETAILS / COMPONENTS

Flashing an ESP01 module is simple. Just follow these steps:

1. - Place the ESP01 on the shield.

2. -Connect the shield to the Arduino UNO.

3. Connect the Arduino to the PC through the USB cable.

4. Place the jumpers as described on the board.

5. Press the reset button on the shield.

6. Download the program using the Arduino IDE.

7. Done!
   

### LEARN / TOPIC / BUILD INSTRUCTIONS