|
EagleAutodesk
|
Pocket Mouse Power Board
This board was made primarily for my Pocket Color project (MGBC-MBL-01). The Pocket Color is a Game Boy PCB that fits inside a Game Boy Pocket shell, but utilizes the Game Boy Color CPU, and includes a variety of other modern features. The project can be found at this link: https://www.pcbway.com/project/shareproject/Game_Boy_Pocket_Color_MGBC_MBL_01_Half_silkscreen_version_7490e384.html
Some features of this power board that differentiate it from other power supply boards for Game Boys include:
- Changing the power switch to a "soft power switch," meaning the main power of the Game Boy does not flow through the switch. A dirty power switch can severly impact performance, so using this scheme can remedy that issue.
- Bootloop protection circuitry to prevent overdischarge of AAA batteries, and to allow the Game Boy to die gracefully instead of violently stuttering until the regulator gives up.
While designed for use with my MGBC boards, this power board has been tested in IPS-modded Game Boy Colors and Game Boy Pockets as well, but not extensively. I don't anticipate any issues when used properly.
Please review all the information on my GitHub repo, for information on how to build and install one for yourself: https://github.com/MouseBiteLabs/Pocket-Mouse-Power-Board
Pocket Mouse Power Board
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(6)
- Josue Fernandez Sep 25,2024
- Engineer Sep 01,2024
- Wleg Apr 03,2024
- isaac ramiro cervantes garcia Jul 09,2023
- Engineer May 22,2023
- carlo GG_CUSTOMS_ May 22,2023
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Nick
- Super Nintendo Advanced Flash Cartridge This is a new and improved Super Nintendo cartridge circuit board design that is capable of being fl...
- Super Nintendo Advanced Flash Cartridge - HiROM This is a new and improved Super Nintendo cartridge circuit board design that is capable of being fl...
- Super Nintendo Advanced Flash Cartridge - LoROM This is a new and improved Super Nintendo cartridge circuit board design that is capable of being fl...
- Game Boy MBC5 Cartridge (Type A, FRAM) A flashable MBC5 Game Boy cartridge that uses the M29F160 and FRAM. I suggest using this board for n...
- Super Game Boy Plus This is the Super Game Boy Plus, or SGB+. It is a circuit board that allows you to enhance an origin...
- Game Boy MBC5 Multicart YOU MUST ORDER WITH ENIG FINISH AT 0.8MM THICKNESS!This is my design of a flashable MBC5-based multi...
- Game Boy MBC3 Multicart YOU MUST ORDER WITH ENIG FINISH AT 0.8MM THICKNESS!This is my design of a flashable MBC3-based multi...
- Game Boy MBC5 Cartridge YOU MUST ORDER WITH ENIG FINISH AT 0.8MM THICKNESS!This is my design of a flashable MBC5-based cartr...
- Game Boy MBC3 Cartridge YOU MUST ORDER WITH ENIG FINISH AT 0.8MM THICKNESS!This is my design of a flashable MBC3-based cartr...
- Game Boy MBC1 Cartridge YOU MUST ORDER WITH ENIG FINISH AT 0.8MM THICKNESS!This is my design of a flashable MBC1-based cartr...
- Pocket Mouse Power Board This board was made primarily for my Pocket Color project (MGBC-MBL-01). The Pocket Color is a Game ...
- Game Boy Pocket Color (MGBC-MBL-01): Half-silkscreen version Thickness must be 1.0mm! If you do not plan to use tactile buttons, you must order ENIG finish! Plea...
- Game Boy Pocket Color (MGBC-MBL-01): Solid color version Thickness must be 1.0mm! If you do not plan to use tactile buttons, you must order ENIG finish! Plea...
- Game Boy DMG Color (DMGC-HDP-01) Please review information in the GitHub repo!!This is the HDP (headphone) board (one of four PCBs) f...
- Game Boy DMG Color (DMGC-PWR-01) Thickness must be 1.2mm or less! Please review information in the GitHub repo!!This is the PWR board...
- Game Boy DMG Color (DMGC-IPS-01) Thickness must be 1.2mm! Please review information in the GitHub repo!!This is the IPS board (one of...
- Game Boy DMG Color (DMGC-CPU-01) Thickness must be 1.2mm! Please review information in the GitHub repo!!This is the CPU board (one of...
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
33 0 0 -
-
-
-
Sega Master System RGB Encoder Switcher Z80 QSB v1.2
39 0 0 -
18650 2S2P Battery Charger, Protection and 5V Output Board
51 0 0 -
High Precision Thermal Imager + Infrared Thermometer | OpenTemp
341 0 5 -
Sony PlayStation Multi Output Frequency Oscillator (MOFO) v1
108 0 2 -
-
XRC PRO: Open-Source RC Transmitter and Receiver System
144 0 2