Macintosh IIcx ATX PSU
This project is intended to replace the power supply of a 1989 Macintosh IIcx with a modern power supply.
This project converts an ATX power supply (PICO PSU) to the 10 Pin power supply of the Macintosh IIcx, respecting all the functionality of the original power supply.
Combined with a PICO PSU and a Meanwell AC to DC 12 V, it fit inside the original PSU housing.
Main goal of this project is to make old 68K Macintosh reliable again.
As a bonus, power consumption is reduced!
Macintosh IIcx ATX PSU
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(4)
More by Julien Lazarewicz
-
Programmable Mist Maker - XIAO / QT PY Extension
1426 2 1 -
RadioHAT - Raspberry Pi radio development platform
1201 0 3 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3563 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4242 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4622 2 2
