MCU RC BOAT
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Koen Muilwijk
-
temperature en Pingpong
Educational PCB. To be used to learn control technology. either with PWM warm up the resistor to a c...
-
Autopilot redundant
Redundant power to servo autopilot sailboat
-
RTK-GPS heading
STM32 with possibility to connect two GNSS receivers do do RTK moving baseline vector heading
-
AutoPilot with RTK-Heading
Autopilot with STM32 input is an RTK heading from two GNSS receivers
-
MCU RC BOAT
MCU for an autoilot for an autonomous boat
-
temp and pingpong PID board
This stack on PCB can be used on the CC3220 LaunchXL and you can test heating the Resistor and measu...
-
Sub D9 Breakout Board
Sub D9 Female and Male breakout board
-
Programmable Mist Maker - XIAO / QT PY Extension
1036 2 1 -
RadioHAT - Raspberry Pi radio development platform
840 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3296 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3913 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4292 2 2
