Linobit - A Core Rope ROM Device
### DESCRIPTION
Linobit is a core rope ROM device. Information is set on it by weaving a wire through its coils. It stores 8 5-bit bytes, so you can write up to 8 letters and see them on the OLED display.
Atmega328 running on internal oscillator, powered by 2 AA batteries. Reads the coils, sets the display and goes to sleep until its waken up by the user button.
LEDs show which wire was driven by the 3-8 decoder, and can be disconnected via solder jumper to lower battery consumption.
https://www.instagram.com/p/BpVCCfCh5k4
Linobit - A Core Rope ROM Device
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(0)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
8design
-
7usability
-
10creativity
-
6content
More by Wesley Lee Yang
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
164 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1025 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
587 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3056 2 3 -
RadioHAT - Raspberry Pi radio development platform
2604 0 4 -
-
-
