|
fusion360 |
Isogrid 2.5" disk shelf
This is the step file for the side of a disk shelf that holds up to 8 2.5" HDD or SSD. It is made using and isogrid style structur to allow for good rigidity while maintaining a reasonable airflow, should accomodate easily drives up to 20mm in thickenss while having clearance, so NVMe drives aren't an issue.
For a complete shelf you need to manufacture a pair of side walls.
Isogrid 2.5" disk shelf
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
9design
-
8usability
-
10creativity
-
8content
More by Andrea Zanetti
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
142 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
991 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
569 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3041 2 3 -
RadioHAT - Raspberry Pi radio development platform
2585 0 4 -
-
-
