Stephen Hawes
UNITED STATES OF AMERICA • + Follow
Components
|
|
WS2812B LEDs |
x 8 | |
|
|
1X3 JST PH SMD Connector |
x 1 |
Description
Index PnP Ring Light REV000
This PCB is designed to provide even lighting to components for a pick and place machine. The lens goes through the center of the board, allowing light to hit the component from all angles. This board can be used for both up and down cameras, and are brightness and color controllable.
Code
https://github.com/sphawes/index
Schematic and Layout
https://github.com/sphawes/index
Jul 09,2020
4,159 views
Index PnP Ring Light REV000
This PCB acts as a ring light for pick and place cameras! It has eight WS2812B RGB LEDs onboard, so it can handle any color.
4159
3
2
10.00 (1)
Published: Jul 09,2020
Standard PCB
Download Gerber file 136
PCBWay Donate 10% cost To Author
Only PCB
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(3)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
VOTING
1 votes
- 1 USER VOTES
10.00
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
10.00
More by Stephen Hawes
-
Index PnP Motherboard REV001
This is the second pass at a universal controller for a Pick and Place machine! This revision uses a...
-
Index Motherboard REV03
The third revision of the Index Motherboard is here! Here's a bit about what it is:Based on the STM3...
-
Index PnP Ring Light REV000
This PCB is designed to provide even lighting to components for a pick and place machine. The lens g...
-
Index PnP Motherboard REV000
This board is designed to control the Index Pick and Place, along with most (if not all) hobbyist pi...
-
Index PnP Motherboard REV000
This board is designed to control the Index Pick and Place, along with most (if not all) hobbyist pi...
You may also like
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
376 0 0 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
724 3 6 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
702 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
920 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
781 0 1
