ITS1A clock boards
ITS1A Clock
This is a clock for the vintage ITS1A thyratron tubes. I didn’t think that my first six tube clock would be an ITS1A clock, but after I got some of the tubes and spent a little time getting them to light up (and then be able to control what was displayed), it seemed a small step to building an actual clock.
Guiding Principles
- I wanted this to be all through-hole components so that I could sell spare boards as kits for others to build.
- I wanted to re-use a lot of my existing clock code that runs on ESP8266 chips.
You can read more about the project on my blog
Here is a video of it in action:
ITS1A clock boards
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Mark P Andrews
-
Programmable Mist Maker - XIAO / QT PY Extension
1827 2 2 -
RadioHAT - Raspberry Pi radio development platform
1558 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3789 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4540 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5342 2 2 -
