INTEL J1 VTOL Arm Rings
In order to assemble the INTEL J1 VTOL Drone – Fully 3D Printable Edition, the boom that holds lift motors needs a strong attachment to avoid flexing when the motors are in operation. These parts are cnc machined, meaining, they are light but strong. To find out more about the project please refer to this link https://cults3d.com/:4267976
INTEL J1 VTOL Arm Rings
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Ebenezer Sasu
-
Programmable Mist Maker - XIAO / QT PY Extension
1636 2 1 -
RadioHAT - Raspberry Pi radio development platform
1368 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3697 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4400 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5200 2 2 -
