|
KiCADKicad
|
Eurorack ARP 2600 inspired VCF
This is a fully through hole component Eurorack voltage controlled low pass filter based on the one in the ARP 2600. There were different filters in the ARP 2600 at different times, this is the 4072 variety and is not a diode ladder filter like the early one.
Inspiration and the starting point for schematics for this filter taken from Eddy Bergman and Yusynth
This module is 10hp (~50mm) wide and runs on a standard dual rail 12v eurorack supply.
See a longer write up of this project on my website: https://mohoyt.com/blog/2024/2600ish-vcf
Eurorack ARP 2600 inspired VCF
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(4)
- Likes(3)
More by Engineer
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
247 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
246 0 1 -
-
-
