A ESP32 keypad touchscreen wall mount enclosure. Intended for home alarm but displays weather solar and whatever. YAML provided for ESPHome (will need modification for your setup).

A ESP32-WROVER with PSRAM is needed for a display of this size in ESPHome 480x320. A ESP32-WROOM could be used but the display dimensions need to be reduced which will leave some of the display unusable.

Can be powered by either the 5v headers on the custom PCB or the USB connector on the ESP32 module.

The Matrix Keypad and Display is intended to be connected to the custom PCB with pin headers/connectors.

The ESP32 is intended to be connected with pin headers soldered directly to the ESP32 and the custom PCB without using a socket. This allows the ESP32 to sit lower and its onboard USB port to be used for power. It should be possible to use a socket but I have not tested the fit and the power headers on the custom PCB will need to be used.

3d Print files Intended for FDM printing in PLA. The two halves should press fit together without the need for fasteners.

Attached images are printed in 3dfillies Translucent PLA+, on a Prusa Mini with a 0.25mm nozzle.