|
|
ESP32-C3FN4Espressif
|
x 1 | |
|
|
TMP117MAIDRVRTexas Instruments
|
x 1 | |
|
|
MIC5504-3.3YM5-T5 |
x 1 | |
|
|
MCP73831T-2DCI/MCMICROCHIPTECHNOLOGYINC
|
x 1 |
ESP32 digital bandage.
This is a PoC project of a digital bandage that have the capabilities of monitoring patient temperature. The onboard EPS32-C3 can connect to a mesh network or a gateway and periodically report the user temperature. The type of setup can be powered by 301220 or 581013 lipo battery. Since the data is "pushed" and not pull a deep sleep can be utilized prolonging the battery's life. Also there is a button on the patch itself if the user cannot wait and want to take his/her temperature immediately. The board is 2 layered flex PCB with rf4 stiffener and it is secured to a user with double adhesive much like a traditional bandage. The board has a flex cable connector to be able to charge the battery if need and or do the initial software upload.
ESP32 digital bandage.
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(3)
More by Engineer
-
-
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
337 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
392 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1504 0 3
