ESP32-S2 Module
Wi-Fi USB ADC Module
This project, is a 4-layer board, containing differential pairs, impedance control and signal integrity.
The project provides:
- Microcontroller ESP32-S2, which makes the communication interface between USB and Wi-Fi;
- 2,4GHz Embedded PCB Antenna;
-+5V power supply via USB-C or P4 connectors;
-24-bits analog inputs by ADS131M02 converter;
- Mosfet digital outputs.
ESP32-S2 Module
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(3)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Leonardo Bortoluz
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
156 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1009 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
578 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3047 2 3 -
RadioHAT - Raspberry Pi radio development platform
2595 0 4 -
-
-
